Full-roll photo · T319 – gloss white/PP self-adhesive cryogenic label
BRD 博锐迪 · Lab&HC Laboratory & Medical Labels
Lab263-319 · 45 × 95 mm vertical long-strip gloss white PP synthetic paper refrigerated label
The 45 × 95 mm vertical long-strip format uses the longest edge in the T319 range; the vertical layout carries multiple lines of information and a long barcode, and can also wrap around the tube body. Suitable for refrigerated environments from room temperature to -40 °C.
Item No. Lab263-31945 × 95 mm vertical long stripT319 gloss white PP synthetic paper-40 °C refrigerated grade500-1000 labels/roll
Product Overview
Lab263-319 is a laboratory cryogenic self-adhesive label using gloss white PP synthetic paper as the face stock, for refrigerated environments from room temperature to -40 °C. Nominal size 45 mm × 95 mm vertical long-strip format, rounded or square corners optional, packaging 500-1000 labels/roll. The product name is labeled "laboratory cryovial microscope slide biological sample bank label cryogenic adhesive," and the full-roll photo caption reads "T319 – gloss white/PP self-adhesive cryogenic label." 95 mm is the longest single edge in the T319 range: in vertical layout it accommodates multiple lines of text plus a long barcode from top to bottom, while in wrap-around use it is long enough to encircle a medium-diameter tube body once, so a single label serves both "information capacity" and "wrap strength." Printing is matched with BRL-80-BK / BRL-110-BK laboratory cryogenic ribbons, compatible with M611, EOS2/3, and MACH4S laboratory label printers.
Key Features
长
95 mm vertical long strip
The 95 mm long edge of the 45 × 95 mm format is the longest edge in the T319 range; in vertical application it provides ample vertical layout space, and in wrap-around use it covers a wider area, greatly increasing the bonding area compared with standard horizontal strips.
容
Multi-line information capacity
The vertical layout accommodates multiple fields such as name, ID, date, expiry, and notes, plus a sufficiently long barcode or QR code, so a single label can carry complete archive-level information.
覆
Wrap-around application
Wrap around the tube body for one full turn with overlapping start and end; adhesion comes from the full-circle wrap rather than a single flat surface, making it more secure through repeated insertion and removal in the cold chain.
冷
-40 °C refrigerated-grade cryogenic adhesive
Both the product category and the specifications section indicate the -40 °C refrigerated grade; the cryogenic adhesive maintains adhesion through the cold chain, applies immediately at room-temperature handling, and does not fall off during outbound transfer.
Specifications
| Item No. | Lab263-319 |
| Nominal size | 45 mm × 95 mm (vertical long strip, 95 mm is the long edge) |
| Face stock | T319 / gloss white PP synthetic paper cryogenic adhesive (per full-roll photo caption) |
| Temperature range | Room temperature to -40 °C (refrigerated environment) |
| Corners | Rounded/square corners optional |
| Packaging | 500-1000 labels/roll |
| Matching ribbon | BRL-80-BK / BRL-110-BK laboratory cryogenic ribbon |
| Compatible printers | M611 / EOS2/3 / MACH4S laboratory label printers |
| Data source | Product page specifications section + category name + full-roll photo caption |
Full-roll photo · gloss white PP roll format
The product page specifications section states "Specification size: 45x95mm," consistent with the product name; this page follows that wording. The product name includes "microscope slide," but T319 is not currently listed in the official material guide table and has no table row to verify against; the only entry in the official table covering the microscope slide scenario is T629 nylon cloth all-scenario version, so microscope slide use should be confirmed by sample proofing. The specifications section "Material code" only states "refrigerated label series"; the face stock description follows the photo caption "gloss white PP."
Typical Applications
Vertical archive-level bottle label
Applied vertically to reagent bottles and specimen bottles, arranging project name, ID, sampling date, and expiry in multiple lines from top to bottom, with a long barcode at the bottom, so a single label is a bottle-accompanying record.
Wrap-around tube label
Wrapped around medium-diameter cryovials/microcentrifuge tubes for a full turn, with a large full-circle bonding area, suitable for transfer tubes subject to repeated insertion, removal, and friction in refrigerated cabinets.
Long barcode carrier label
When a longer physical barcode length is needed to achieve a finer module width and improve long-distance scan hit rate, the 95 mm vertical format gives the barcode ample room to extend.
FAQ
Q: Can it be used on microscope slides?
A: The product name indicates the microscope slide scenario, but T319 is not currently listed in the official material guide table and cannot be verified against the table; the entry in the official table covering the microscope slide scenario is T629 nylon cloth version (all-scenario checked). We recommend requesting a sample to test adhesion and low-temperature performance on the target slide first; for more materials and specific applications, please contact the product manager for selection.
Q: For 45 × 95 mm, should it be applied vertically or wrapped?
A: Both are feasible: vertical application uses the 95 mm long edge for a multi-line information field, suitable for bottle bodies; wrap-around application uses the long edge to encircle the tube body once, suitable for frequently transferred tubes. Finalize the layout according to the application method to avoid field truncation from mixed use.
Q: Can T319 withstand liquid nitrogen at -196 °C?
A: This page is written according to the -40 °C refrigerated grade in the product category and specifications section; the official material guide table does not currently include a T319 row, so no -196 °C/-80 °C commitment can be given. If you have liquid nitrogen or ultra-low temperature requirements, please choose T429 or T629, which are listed in the official table.
Q: What ribbon and printer are required for printing?
A: Matched with BRL-80-BK or BRL-110-BK laboratory cryogenic ribbon, compatible with M611, EOS2/3, and MACH4S laboratory label printers; for long-format multi-line layouts, a test print is recommended before the first batch to confirm line spacing and barcode module clarity.
Selection & Usage Guide
- Family comparison: for multi-line archive-level information and wrap-around application, choose this 45 × 95 mm; for standard tube labels with one barcode line and one text line, switch to the 60 × 30 mm Lab127-319; for minimal short IDs, switch to the 50 × 25 mm Lab027-319.
- For a -40 °C version listed in the official material guide table: choose T329 matte white PP or T419 gloss white PET (cryovials/microcentrifuge tubes, resistant to -40 °C and above).
- For -80 °C/-196 °C ultra-low temperature: switch to the T429 matte white PET polyester series (overlap at least 3 mm at start and end when applying to frozen tube surfaces) or the T629 nylon cloth all-scenario version.
- For wrap-around application, overlap the start and end by at least one character width; wipe the tube body clean before application, and press firmly and let stand after application before placing in refrigeration.
Usage Notes
Note: This product is -40 °C refrigerated grade; do not use in environments beyond the product page specifications, such as liquid nitrogen at -196 °C, -80 °C freezers, or 121 °C autoclaving; suitability for containers such as microscope slides is subject to sample proofing verification; please confirm the latest wording with customer service before bulk ordering.
Need a bulk quotation or sample trial?
Custom sizes and printing available on request; sample trials provided. Sales Hotline 18015583218.
Sales Hotline 18015583218
