Full roll photo · T459 gloss/clear cryogenic PET self-adhesive (caption: T459 gloss/clear cryogenic PET self-adhesive)
BRD 博锐迪 · Lab&HC Laboratory & Medical Labels
Lab115-459 · 9.53 + 65 × 9.53 mm self-laminating combination-format label
Two labels per roll: a 65 × 9.53 mm long strip label wraps around the tube body, and a 9.53 mm small label goes on the cap or rack position; the self-laminating clear tail folds over to protect the printed content and leaves a liquid-level viewing window. Passes all four tiers from -196 °C LN₂ to 121 °C autoclaving.
Item No. Lab115-4599.53 + 65 × 9.53 mm combination formatT459 ultra-thin polyester self-laminatingLN₂ -196 °C ~ 121 °C, four tiers500-1000 labels/roll
Product Overview
Lab115-459 is a laboratory label made with ultra-thin polyester (PET) face stock and a self-laminating structure with a clear tail. The nominal specification on the page is 9.53 + 65 × 9.53 mm, a combination-format version fed from a single roll: one 65 × 9.53 mm long strip label for tube body details, and one 9.53 mm small label for the top of the cap or cryobox rack position. Packaging is 500-1000 labels/roll. The full-roll photo shows white print blocks alternating with clear tails; the clear segment is the fold-over allowance of the self-laminating layer. The official material guide describes T459 as "an ultra-thin polyester label, a self-laminating label with a clear tail that protects the printed content and leaves a clear window for observing the liquid level." Temperature coverage spans four tiers: LN₂ -196 °C, freezer -80 °C, hot water 100 °C, and autoclaving 121 °C. The application range checks two columns: "cryovials/test tubes" and "cells." The practical value of the combination format is that two labels for different purposes come out in a single pass: the long strip label carries tube body details, and the small label provides quick positioning on the cap and rack position. Supplying both from the same roll and same batch avoids the adhesion differences that come from mixing two rolls of different materials. Printing is matched with BRL-80-BK / BRL-110-BK laboratory cryogenic ribbons, compatible with M611, EOS2/3, and MACH4S laboratory label printers.
Key Features
Combo
Long strip label + small label on one roll
The 9.53 mm small label and the 65 × 9.53 mm long strip label are fed from the same roll: the long strip label goes on the tube body for details, the small label on the cap for positioning. Two labels are ready in a single pass—no roll changes to match labels, and no separate stocking for two sizes.
Lam
Clear-tail self-laminating protection
After printing, fold the clear tail over the printed surface and press down; the thermal-transfer print is covered by the film layer and no longer exposed. It resists wear under repeated freeze–thaw handling and wiping (official wording: protects the printed content).
Window
Liquid-level viewing window
The 65 mm long strip label retains a clear segment after fold-over, so the liquid level can be read directly when applied to the tube wall; specimen status can be judged inside the tank without removing the cap (official wording: leaves a clear window for observing the liquid level).
Tiers
Passes all four temperature tiers
The official table checks all four tiers: LN₂ -196 °C, freezer -80 °C, hot water 100 °C, and autoclaving 121 °C. From -80 °C freezer storage to long-term LN₂ storage and then rewarming and autoclaving, no label change is needed throughout.
Specifications
| Item No. | Lab115-459 |
| Nominal specification | 9.53 + 65 × 9.53 mm combination format (page note: 9.53 mm small label + 65 × 9.53 mm long strip label on the same roll) |
| Face stock | T459 / ultra-thin polyester (PET), gloss finish, clear-tail self-laminating structure |
| Temperature range | LN₂ -196 °C / freezer -80 °C / hot water 100 °C / autoclaving 121 °C (all four tiers checked in the official table) |
| Application | Cryovials/test tubes, cells (two columns checked in the official table; conical tubes, microscope slides, room temperature, general-purpose, and packaging identification are not checked) |
| Application notes | Wrap the long strip label around the tube body and fold over the clear tail; apply the small label to the top of the cap or the rack position; increase the contact area for ultra-low temperature applications |
| Packaging | 500-1000 labels/roll |
| Matching ribbon | BRL-80-BK / BRL-110-BK laboratory cryogenic ribbons |
| Compatible printers | M611 / EOS2/3 / MACH4S laboratory label printers |
| Data source | Product page specification section + product name + full-roll caption + official material guide |
Full roll photo · 9.53 mm small label and 65 × 9.53 mm long strip label on the same roll
The product page specification section states "Specification dimensions: see product details" and does not list specific dimensions. This page uses the nominal 9.53 + 65 × 9.53 mm from the product name. The die-cut shapes and roll layout of the two labels are subject to the page illustration; please confirm shipping dimensions with customer service before ordering. The product name includes "conical tubes," but the official table does not check the conical tube column for T459's application range; this page follows the official table. The specification section's "Material code: self-laminating series" does not specify the T459 material code; the specification table is completed according to the official table.
Typical Applications
Two-level identification: tube body + cap
The long strip label wraps around the tube body for specimen details, and the small label on the cap top marks the serial number or color dot: when retrieving a tube, first check the cap to identify the individual, then read the body for details—two levels of information in one step.
Cryobox rack position marking
The 9.53 mm small label is applied to cryobox grid positions or drawer dividers as a rack position marker. Same roll, same batch, and same material as the tube body labels—position markers do not yellow or lift at long-term low temperatures.
Direct liquid-level reading window
After the long strip label's clear tail is folded over, the clear segment remains aligned with the liquid-level range on the tube wall, so the liquid level and remaining specimen volume can be judged inside the LN₂ tank or freezer without removing the cap.
FAQ
Q: How do I use a combination-format roll?
A: Two labels for different purposes come from the same roll: the 65 × 9.53 mm long strip label wraps around the tube body to carry specimen details, and the 9.53 mm small label goes on the cap top or cryobox grid position for quick positioning. Both are from the same batch and material, so low-temperature adhesion performance is consistent.
Q: What is the correct way to apply a self-laminating label?
A: After printing the variable fields, fold the label's clear tail over the print area and press it flat and firm. The clear tail covers the printed content to form a protective layer; if not folded over, the film protection and window division are lost.
Q: The small label is only 9.53 mm—is that enough for printing?
A: The small label is intended as a position marker. We recommend using only short serial numbers, color dots, or single characters; leave long IDs and barcodes to the long strip label. The page does not specify the exact die-cut shapes and roll layout of the two labels; we recommend requesting samples for confirmation before bulk ordering.
Q: Can it be autoclaved together with the container?
A: The official table checks all four temperature tiers for T459, including 121 °C autoclaving, so it can go through the sterilization process with the container. This is the key difference from T509 (121 °C not checked) and T419, T329 (only -40 °C).
Q: Can it be used on conical tube surfaces?
A: The product name includes "conical tubes," but the official table does not check the conical tube column for T459's application range; only cryovials/test tubes and cells are checked. Conical surfaces are irregular bonding surfaces; we recommend proofing first to verify conformity before bulk ordering.
Selection & Usage Guide
- If you need a single large-format label with long IDs and long barcodes without truncation: choose Lab121-459 (66.68 × 15.24 mm long strip format).
- If you need an economical -40 °C tier for routine freezing: choose T419 (gloss white PET) or T329 (matte white PP).
- If you need to wrap thin tubes (without autoclaving): choose the T509 vinyl wrap-around version; if you need all-scenario versatility for room temperature/microscope slides/conical tubes: choose the T629 nylon cloth label.
- The combination-format layout is subject to the page illustration; before bulk purchasing, we recommend requesting samples to verify die-cut shapes and label spacing.
- Before labeling, wipe oil, dirt, and moisture from the tube body; press the clear tail firmly after fold-over. Final performance at low temperatures is subject to actual proofing results.
Usage Notes
Note: The product name includes "conical tubes," but the official material guide does not check the conical tube application column for T459. Please proof first to verify adhesion on conical tube surfaces. The specification section states "see product details"; the die-cut shapes and roll layout of the two labels are subject to the page illustration. Before bulk ordering, please confirm shipping dimensions and the latest material specifications with customer service.
Need a bulk quotation or sample trial?
Custom sizes and printing available on request; samples available for trial. Sales Hotline 18015583218.
Sales Hotline 18015583218
