Full roll actual photo · T329 cryogenic matte white PP synthetic paper label
BRD 博锐迪 · Lab&HC Laboratory & Medical Labels
Lab058-329 · 100 × 100 mm Large-Format Refrigerated Label
Matte white PP synthetic paper face stock, 100 × 100 mm large single-piece square format, carton-marking-level information capacity, for packaging and general identification in ambient to -40 °C refrigerated environments.
Item No. Lab058-329100 × 100 mmT329 / PP synthetic paper-40 °C refrigerated grade500-1000 labels/roll
Product Overview
Lab058-329 is a large-format laboratory cryogenic label using matte white PP synthetic paper face stock, for ambient to -40 °C refrigerated environments. Nominal size 100 × 100 mm, rounded or square corners available, packaging 500-1000 labels/roll. In the official material guide, T329 is checked for ambient, cryovial/test tube, general-purpose and packaging identification applications. This model, with its 100 × 100 mm large format, focuses on the general-purpose and packaging identification dimensions: a single label exceeds the 60 × 60 mm and 80 × 80 mm square formats in the same series and can accommodate multiple field groups such as carton number, batch number, manifest barcode, date and responsible person. Printing is matched with BRL-80-BK / BRL-110-BK laboratory cryogenic ribbons, compatible with M611, EOS2/3 and MACH4S laboratory label printers.
Key Features
Size
100 × 100 mm carton-marking-level large format
The largest single-piece square format in the current T329 series, exceeding 60 × 60 mm and 80 × 80 mm; one label carries all fields required for outer carton identification, eliminating the need to combine multiple labels.
Carton
Packaging identification focus
The officially checked "packaging identification" application naturally matches the large format: specimen transport carton marks, cryobox outer packaging, reagent outer carton seals and storage location signs can all be printed in batches.
Write
Dual-track face stock: print and handwriting
The matte white surface prints clearly with thermal-transfer ribbon and also supports marker pen annotation; the workflow of printing base carton marks first during intake peaks and hand-writing serial numbers on arrival transitions smoothly.
Cold
-40 °C refrigerated-grade cryogenic adhesive
Per the official material table, T329 withstands -40 °C refrigerated conditions, with stable adhesion from ambient to refrigerated environments, forming a clear temperature boundary with the -80 °C/-196 °C polyester grade.
Specifications
| Item No. | Lab058-329 |
| Nominal size | 100 mm × 100 mm (square) |
| Face stock | T329 / matte white PP synthetic paper cryogenic adhesive |
| Temperature range | Ambient to -40 °C (refrigerated environment) |
| Corners | Rounded/square corners available |
| Packaging | 500-1000 labels/roll |
| Matching ribbon | BRL-80-BK / BRL-110-BK laboratory cryogenic ribbon |
| Compatible printers | M611 / EOS2/3 / MACH4S laboratory label printers |
| Data source | Product page specifications + official material guide |
Typical Applications
Specimen transport carton marks
A single 100 × 100 mm square label accommodates carton number, batch number, specimen manifest barcode, date and handler; applied flat to the carton side, the full carton information is visible at a glance, enabling efficient handover scanning.
Cryobox and outer packaging identification
Large labels for cryobox lids and sides and transport seals are printed in batches, forming a two-level identification system of "large label outside the box + small label on the tube" with small tube labels inside the box.
General large containers and storage location identification
Flat, large surfaces such as reagent drums, transfer bins and drying cabinet compartments can be labeled in full format, enabling unified zone management of ambient and refrigerated storage areas together with location numbers.
Implementation Workflow
1
Confirm printer width
Confirm the printer model in use covers a 100 mm print width, load the roll on the core, and complete paper width and density calibration.
2
Design the carton mark layout
Lay out by zones of "carton number + batch + manifest barcode + date + handler" and preview to confirm fields do not overflow the 100 mm format.
3
Trial application verification
Print 3-5 labels and apply them to the target carton surface first; after pressing firmly, confirm the edges lie flat before batch printing.
4
Storage and archiving
After labeling, let stand briefly before placing into refrigeration; register carton numbers and storage location records in sync for easy scanning and retrieval.
FAQ
Q: Why does the page state -40 °C instead of -196 °C?
A: In the official material guide, T329 is listed as "matte white/PP label, -40 °C low-temperature freezer label" and is not checked for the liquid nitrogen -196 °C grade; this page follows the official table. For -196 °C liquid nitrogen or -80 °C freezer environments, please switch to the T429 polyester series or the T629 nylon cloth model.
Q: Is the face stock polyester or PP?
A: Per the official material table, T329 is matte white PP synthetic paper cryogenic adhesive, and the full roll actual photo caption also states "T329 cryogenic matte white/PP synthetic paper label"; the "polyester" wording in the name is inconsistent with the official table, and PP synthetic paper prevails.
Q: What printer width is needed for 100 × 100 mm?
A: The single label width is 100 mm. Before loading, confirm that the printer model in use (M611 / EOS2/3 / MACH4S) covers a 100 mm print width and complete paper width calibration; if unsure, confirm the compatibility solution with customer service before ordering.
Q: Can it be handwritten on?
A: The matte white surface supports marker pen annotation; before formal batch use, we recommend proofing to verify ink adhesion and legibility after refrigeration.
Selection & Usage Guide
- For a medium square format: switch to the 60 × 60 mm Lab361-329-500C or the 80 × 80 mm Lab277-329; for micro dots, switch to the φ9.53 mm dot model (T329 grade).
- For -80 °C/-196 °C ultra-low temperature: switch to the T429 matte white PET polyester series; when applying to cryovial surfaces, overlap the ends by at least 3 mm.
- For full-scenario coverage (including microscope slides, conical tubes and ambient): switch to T629 nylon cloth labels.
- For large square formats, apply to flat surfaces; for curved surfaces and small tubes, use smaller strip or dot models; clean and dry the labeling surface and press firmly before storage.
Usage Notes
Note: This model is -40 °C refrigerated grade; do not use in out-of-range environments such as liquid nitrogen -196 °C, -80 °C freezers or 121 °C autoclaving. The 100 × 100 mm large format tends to lift at the edges on curved surfaces; use it preferentially on flat areas such as carton bodies and box surfaces.
Need a bulk quotation or custom size?
Custom sizes and printing available on request; samples available for trial. Sales Hotline 18015583218.
Inquiry Hotline 18015583218
