Full roll actual photo · T419 gloss white / PET polyester adhesive label (rectangle + dot combo die-cut)
BRD 博锐迪 · Lab&HC Laboratory & Medical Labels
Lab038-419 · 25.4 × 9.53 mm rectangular main label + Φ9.53 mm dot auxiliary label combo format (gloss white PET)
One label, two formats: the rectangular main label carries the ID and barcode on the tube body, while the dot auxiliary label marks the cap and rack positions. One roll outputs both labels, suitable for the entire refrigerated chain from room temperature to above -40 °C.
Item No. Lab038-41925.4 × 9.53 mm main label + Φ9.53 mm dotT419 gloss white PET polyester filmRoom temperature to above -40 °C500-1000 labels/roll
Product Overview
Lab038-419 is a laboratory adhesive label using gloss white PET polyester film as the face stock, designed for environments from room temperature to above -40 °C. Its nominal combo format is a 25.4 mm × 9.53 mm rectangular main label plus a Φ9.53 mm circular auxiliary label. The full-roll caption reads "T419 gloss white / PET polyester adhesive label," and the packaging quantity is 500-1000 labels/roll. Its role within the Lab038 family is clearly defined: the same-size Lab038-429 (T429 material) covers the full ultra-low temperature range of -196/-80/100/121 °C, while this T419 version, positioned as the economical option, covers the room temperature to -40 °C refrigerated range, leaving budget for high-volume daily labeling of cryovials and microcentrifuge tubes. The 25.4 × 9.53 mm main label follows the standard imperial 1″ × 0.375″ ratio, fitting exactly one line of barcode or one line of ID text. The dot auxiliary label has a diameter of 9.53 mm, applied to the top of the cap or the corner of a cryobox well as a color-dot-level position marker. Printing is matched with BRL-80-BK / BRL-110-BK laboratory cryogenic ribbons, compatible with M611, EOS2/3, and MACH4S laboratory label printers.
Key Features
Combo
Combo format, one roll dual use
The rectangular main label and Φ9.53 mm dot auxiliary label are die-cut on the same roll and dispensed from the same roll, producing two formats in a single pass; tube body information and cap position markers each have their place, eliminating roll changes and manual cutting.
Bright
Gloss white PET, high contrast
The gloss white polyester film has high whiteness, providing clear contrast for black text and barcodes, making scanning and visual verification effortless; the PET film surface is abrasion-resistant, so text does not smear during handling.
Apply
Main label on tube body, auxiliary label on positions
The 25.4 × 9.53 mm main label wraps horizontally around small-diameter tubes without obscuring the liquid level; the 9.53 mm dot is applied to caps, cryobox well positions, or beside plate wells, completing two-level identification in one motion.
Economy
Economy grade for above -40 °C
The official material guide positions T419 as the gloss white PET economy option, resistant to above -40 °C environments; high-volume refrigerated labeling keeps costs down while retaining the stiffness and durability of PET film.
Specifications
| Item No. | Lab038-419 |
| Nominal combo format | 25.4 mm × 9.53 mm rectangular main label + Φ9.53 mm circular auxiliary label (same-roll die-cut) |
| Face stock | T419 / gloss white PET polyester film adhesive |
| Temperature range | Room temperature to above -40 °C (per official material guide) |
| Application | Cryovials/test tubes, general purpose, packaging labeling (checked in official table) |
| Corner shape | Rounded/square corners available |
| Packaging | 500-1000 labels/roll |
| Matching ribbon | BRL-80-BK / BRL-110-BK laboratory cryogenic ribbon |
| Compatible printers | M611 / EOS2/3 / MACH4S laboratory label printers |
| Data source | Product page specifications section + product name + full-roll caption + official material guide |
Full roll actual photo · gloss white PET combo format roll
The product page specifications section states "Specifications: multiple sizes available, see product detail images," which is inconsistent with the product name's nominal 25.4X9.53+Φ9.53 mm. This page is written according to the combo format stated in the product name and the die-cut format shown in the full-roll caption. Please confirm the shipping specifications with customer service before ordering. The product name and specifications section state "-80 °C," while the official material guide lists T419 as resistant to above -40 °C; this page follows the official table.
Typical Applications
Two-level cryovial identification
The main label wraps horizontally around the tube body for ID and barcode, while the dot auxiliary label marks the cap top to distinguish batches or groups. Information is complete from cap to body, allowing verification without pulling the tube out.
Microcentrifuge tube side labeling
The 25.4 × 9.53 mm narrow format adheres to the side of microcentrifuge tubes without blocking liquid level observation; the matching dot label serves as an open/closed status check at the cap seal.
Rack and well position dot marking
Use dot auxiliary labels for position marking on cryobox wells, rack crossbars, and beside plate wells; the main label is reserved for box-side numbering, giving a clear layered view of the entire box of specimens.
FAQ
Q: How do I choose between this and the same-size Lab038-429?
A: Both share the same prefix and combo format; the difference is the material grade. Lab038-429 uses T429 matte white PET polyester, with the official table covering four tiers: -196 °C liquid nitrogen, -80 °C freezer, 100 °C hot water, and 121 °C autoclaving. This Lab038-419 uses T419 gloss white PET, resistant to above -40 °C. Choose 429 for liquid nitrogen or -80 °C freezer use; choose 419 for room temperature to -40 °C refrigerated handling, which is more economical.
Q: Can it be placed in a -80 °C freezer or liquid nitrogen?
A: The official material guide lists T419 as resistant only to above -40 °C and does not check the -80 °C/-196 °C tiers; this page follows the official table. For ultra-low temperature needs, please switch to T429 (apply to frozen tube surfaces with at least 3 mm overlap at the ends) or the T629 nylon cloth all-scenario version.
Q: Can I buy only the main label without the dot auxiliary label?
A: This product is a combo format full-roll die-cut, with both formats dispensed from the same roll. If you need only a single format or need to adjust the main label/dot ratio, please contact customer service for customization.
Q: What ribbon and printer are needed for printing?
A: Matched with BRL-80-BK or BRL-110-BK laboratory cryogenic ribbon, compatible with M611, EOS2/3, and MACH4S laboratory label printers. As the dot format is small, it is recommended to do a test print before the first bulk run to confirm barcode module clarity.
Selection & Usage Guide
- Family comparison: choose this product for room temperature to -40 °C refrigerated use; for -80 °C/-196 °C or rewarming/autoclaving workflows, switch to the same-size Lab038-429 (T429, four tiers).
- If only a single format is needed without dots: for pure rectangular narrow strips, choose Lab190-419 at 25.4 × 9.5 mm for lower cost.
- For microscope slide or conical tube scenarios: not checked in the official T419 table; please switch to the T629 nylon cloth all-scenario version and verify with a sample proof.
- Before labeling, wipe the tube body clean of oil, dirt, and moisture; press the center of dot labels for three seconds to release air; before bulk use, take a small roll for test printing and test application.
Usage Notes
Note: According to the official material guide, this product is rated for room temperature to above -40 °C. Do not use in liquid nitrogen at -196 °C, -80 °C freezers, 100 °C hot water, or 121 °C autoclaving environments. The "-80 °C" statement in the product name is inconsistent with the official table; please verify the latest specification with customer service before ordering. For ultra-low temperature needs, switch to T429/T629.
Need a bulk quotation or sample trial?
Custom sizes and printing available; sample trials provided. Sales Hotline 18015583218.
Sales Hotline 18015583218
