Image: actual photo of the kit — EOS2/3 printer, label roll with cap, -196 °C LN₂ ribbon (page gallery)
BL13675252 · PTS print kit
EOS2/3 biobank label printer kit
The product name targets EOS2/3 laboratory cryogenic LN₂ cryovials, conical tubes and microcentrifuge tubes. The page gallery shows two CAB EOS series printers side by side, together with a "label roll with cap" and a -196 °C LN₂ ribbon — the three forming a complete set that "prints, sticks and survives freezing."
PTS print kitEOS2/3-196 °C LN₂ ribbonBiobank1 set/box
Product Overview
The EOS2/3 biobank label printer kit (Item No. BL13675252) belongs to the PTS print kit category and is delivered as a complete "equipment + consumables" set. Unlike single-unit listings that ship only one device, this page gallery shows the EOS2/3 series printers in a two-printer view and presents the "label roll with cap" alongside the -196 °C LN₂ ribbon, together forming a complete output solution for deep-frozen specimen identification.
The specifications section lists the application scenarios as LN₂ cryopreservation, biobank and ultra-low temperature environments (-196 °C), packaging as 1 set/box, and the matching ribbon as "includes matching cryogenic ribbon." The value of the kit format is that it enables first-time label production validation right out of the box, avoiding the need to separately purchase the printer, face stock and ribbon and then troubleshoot compatibility one by one.
Note: EOS2/3 in the name refers to the CAB printer series. Although the page gallery shows two printers side by side, whether one or two units are actually delivered, and the specific model and appearance, are subject to the delivery list confirmed with customer service before ordering. Whether a label can enter LN₂ depends on the matching of label material and ribbon temperature grade.
Key Features
Dual
Two-printer view for intuitive series selection (actual photo in page gallery)
The gallery shows two CAB EOS series printers side by side for easy visual comparison of the series before purchase; the actual delivered model is subject to customer service confirmation.
Kit
Three-piece kit, validate out of the box
The gallery shows the printer, label roll with cap and -196 °C LN₂ ribbon together, with printer, face stock and ribbon all included, so you can run a sample proof on first setup.
Ribbon
Matching -196 °C LN₂ ribbon
The ribbon in the kit is labeled -196 °C and is used with deep-freeze labels; the legibility of printed content after LN₂ freeze–thaw cycles is determined jointly by the face stock and ribbon.
Bank
Designed for biobank scenarios
Both the name and specifications target biobank identification management; labels for bulk accessioning, aliquoting and transfer are output from the same set of equipment, keeping numbering rules consistent.
Specifications & Configuration
| Item No. | BL13675252 |
| Category | PTS print kit |
| Model (per name) | EOS2/3 biobank label printer |
| Application | LN₂ cryopreservation, biobank, ultra-low temperature environments (-196 °C) |
| Matching ribbon | Includes matching cryogenic ribbon (shown as -196 °C LN₂ ribbon) |
| Packaging | 1 set/box |
| Dimensions | See product detail images |
| Corners | Not applicable |
| Material code | Printer kit series (category generic field) |
Typical Applications
Bulk accessioning label production in biobanks
During peak accessioning, full rolls are printed by batch; numbers, batch and date are generated uniformly at the labeling station, and the LN₂ ribbon in the kit completes deep-frozen specimen identification output.
Label matching for LN₂ cryopreservation
The page lists LN₂ cryopreservation and -196 °C as application scenarios; before tank entry, run one freeze–thaw validation with the labels and ribbon in the kit, and confirm legibility before going to full-scale production.
Laboratory kit purchasing and replenishment
Equipment and consumables are purchased as a kit; subsequent labels and ribbons are replenished in the same combination to avoid label detachment caused by mixing consumables from different temperature zones.
Pairing with site labels filtered by temperature zone
When the labels in the kit run out, reorder from site categories such as LN₂ labels and self-laminating labels, filtered by temperature zone and container type, keeping the ribbon grade consistent.
FAQ
Q: Does the kit include one or two EOS printers?
A: The page gallery shows the EOS2/3 series in a two-printer view, but the specifications do not state the specific delivery quantity or model. Before ordering, please confirm the actual delivered model, quantity and appearance with customer service and have it put in a written list.
Q: What does the "label roll with cap" shown in the image mean?
A: The gallery presents the printer, label roll with cap and -196 °C LN₂ ribbon side by side. The label roll uses a core-cap structure for dust-proof and moisture-proof storage; please verify the specific size and material against the delivery list.
Q: Can the printed labels go directly into LN₂?
A: Whether a label can enter LN₂ depends on the matching of label material and ribbon temperature grade. The ribbon in the kit is labeled -196 °C; we recommend completing one freeze–thaw validation with actual containers before bulk use.
Q: How do I choose between this and other kit listings on the site?
A: This listing is the EOS2/3 series kit. The site also offers the MACH4S kit (BL13679696) and the M611 mobile kit (M61166). When selecting, first confirm the printer form factor (desktop/mobile) and label width requirements, then choose accordingly.
Selection & Usage Guide
1
Confirm the delivery list
Before ordering, confirm item by item with customer service the printer model, label specifications and ribbon model in the kit, and have it put in a written list to check against on acceptance.
2
Work back from the storage temperature zone
Design the freeze–thaw validation process according to the actual specimen storage temperature zone (LN₂, ULT freezer, refrigerated), and proceed to bulk label production only after validation passes.
3
Register the fixed kit combination
Register the validated "printer + label + ribbon" combination as the laboratory standard configuration; reorder in the same combination, and run a small-batch proof on arrival for records.
4
Choose the workstation by printer form factor
Desktop models suit centralized label production at a fixed workstation; mobile kits suit print-and-apply right beside specimens. Choose the kit according to your laboratory workflow.
Consumables Recommendations
- LN₂ ribbon: matching the same grade as the face stock is a prerequisite for freeze–thaw resistance of printed content; keep the same ribbon model when reordering.
- Label roll with cap: the core-cap structure aids dust-proof storage; laboratories with slow inventory turnover may prioritize core-cap specifications.
- Reorder by temperature zone: site labels can be filtered by LN₂, -80 °C, -40 °C and other temperature zones, keeping consistent with the kit ribbon grade.
- Size coverage: from micro dot labels to large formats, select by cryovial diameter and information volume.
Note: The specifications section on this page is a generic template for the print kit category and does not state printer resolution, print width, the label specification list within the kit, or whether the two-printer view in the gallery represents the actual delivery quantity. Before ordering, please confirm item by item with customer service and request a datasheet. The LN₂ cryopreservation and -196 °C noted on the page are application-scenario references; whether a label can enter the corresponding temperature zone depends on the matching of label material and ribbon temperature grade.
Page note: The specifications field "Printer: M611 / EOS2/3 / MACH4S laboratory label printer" is a generic field for the print kit category and lists the range of compatible models; it does not mean this product contains multiple devices. Packaging: 1 set/box.
Need to confirm the EOS2/3 kit list by biobank temperature zone?
We can help verify the "printer + label + ribbon" kit configuration and support sample proof validation. Sales hotline 18015583218.
Sales Hotline 18015583218
